Latest DIY Projects : Drive BastardMuffRat3 Little PigsRollFuzz

Boss Input / Output Buffer

You can find here circuits & schematics, modifications, information and error reports of some famous pedals. They are useful for reference purpose and everyone can learn much from 'em. They can also be used to build your own clone (BYOC).

Boss Input / Output Buffer

Postby maz » February 14th, 2020, 6:28 pm

Here's a Boss Input / Output Buffer that sometimes I found to be quite useful, when activated it does the same as a Boss stompbox on its off position, in other words it's like when the effect is turned off and the signal is passing only through the input / output buffers.

For sure there's alot of them around, I've built some including pretty good FET buffers but for a reason over my knowledges sometimes these Boss buffers are making some stompboxes or amplifiers to sound better than other buffers, so I thought about drawing one of them then I can use it alone. The transistors are as per the original schematic, this is exactly the same buffers as found in the old OD-1 Overdrive, fortunately I got some 2SC732 but any NPN with the same pinout (E C B) will do. I did my best to make the PCB layout as small as possible.

The schematic


The layout


:pdf: Download the Complete pdf project file for direct PnP transfer, layout and schematic.

:txt: Download Bill of Materials in txt format.

The Boss Input / Output Buffer on veroboard


Because of the light, the color came out with some yellowish but it's a kinda off white ! The design is beautiful I love it ! :love:


Happy DIY !
All together, bigger we can be!
User avatar
Site Admin
Posts: 48
Joined: March 7th, 2014, 4:25 am
Location: Canada

Return to References

Who is online

Users browsing this forum: CCBot [Bot] and 0 guests

 All References : [ Rostex Turbo Metal - No sound at the output fet ] • [ NPN Silicon Fuzz Face ] • [ Most popular Op Amp IC chips for diy pedals ] • [ Big Muff Ram's Head Violet V2 - 1st version 1973 ] • [ Boss OD-1 With Tone Control ] • [ Boss Input / Output Buffer ] • [ Tube Screamer TS-808 ] • [ Unicord / Univox Super Fuzz - modifications ] • [ Big Muff Op Amp 1977 ] • [ Marshall Drive Master with BluesBreaker Tone Control ]

 All DIY Tutorials : [ Homemade Audio Probe for debugging DIY pedals ] • [ Pedal circuit tester ] • [ DIY Frequency Generator ] • [ Combo 12V / 9V Regulated / Filtered Power Supply ] • [ DIY battery pack to power pedals ] • [ DIY Breadboard ]